Skip to Content

Publications and Reports

Following World War II, government agencies started providing major funding for diverse research efforts, at IIHR and elsewhere. This record set includes unpublished IIHR reports for research funded by both governmental and private grants and contracts. A limited number of professional journal publications are also included. Thus the record set gives a good view of IIHR’s applied and fundamental research and contract work spanning the decades immediately following World War II. For unknown reasons, the filing of such reports was halted in 1983.

This record set could be considered the continuation of the “Early IIHR Research” and “World War II Research” record sets. This record set could also be paired with IIHR’s reprint series (housed in the IIHR Resource Center) to give a comprehensive picture of research completed during the stated time period.

The record set, presented as originally found in IIHR files, consists of six boxes of papers arranged chronologically, dated from 1947 to 1983, with one additional box (Box 1) of undated papers, arranged alphabetically by author, that presumably span the same decades. With a very few exceptions, the files include only reports without supporting materials or correspondence. Many of the reports include high-quality photographs (often originals) of equipment and experiments.

It remains unknown whether this record set constitutes a comprehensive collection of contract reports for the period in question. Additional contract reports might be found in the publication and research record sets of the Kennedy, Rouse, or Landweber archives. Reports in this record set are likely to overlap with files in the “IIHR Grants and Contracts” record set, which includes the administrative papers and correspondence describing some of these contract projects.

Box 1. Undated

  • “Equations for Use with the Constant Temperature Hot Wire Anemometer” (W.D. Baines; typed report; undated)
  • “The Development of the Turbulent Boundary Layer on Steep Slopes” (W.J. Bauer; typed paper and photographs; undated)
  • “The Accelerated Motion of a Sphere in a Viscous Fluid” (L.M. Brush Jr., Hao-Wong Ho, and Ben-Chie Yen; typed paper; undated)
  • “Mean-Flow and Turbulence Characteristics in a River Bend” (L.M. Brush Jr.; typed report; undated)
  • “Flow Characteristics of Abrupt Axisymmetric Expansions” (M.C. Chaturvedi; typed paper, blue linen sketches, and overheads; undated)
  • “The Turbulent Wake of a Body of Revolution” (R. Chevray; typed paper; undated)
  • “Critical Regimes of Flows with Density Stratification” (A. Craya; typed paper; undated)
  • “Determination of Seepage Line Through Earth Dam in Relation to Flow Net” (Fu-Huan Fang; typed paper; undated)
  • “Transition Curves of Constant Pressure” (R. Gerber and J.S. McNown; typed paper; undated)
  • “The Historical Development of the Engineering Analysis of Blood Flow” (A.R. Giaquinta; typed report; undated)
  • “Real-Time Digital Processing of Unsteady-Flow Variables” (J.R. Glover and A.R. Giaquinta; typed paper; undated)
  • “Final Report on the Direct Technical Assistance Mission No. 95 to the Government of Argentina” (P.G. Hubbard; typed report; undated)
  • “Pressure Measurements in the Iowa Institute of Hydraulic Research Water-Tunnel and Study of Different Determinations of the Cavitation Index” (M. Hug; typed paper; undated)
  • “A Computational Investigation of Impulsively-Generated Eddies” (Tin-Kan Hung; typed paper; undated)
  • “Measurement of Turbulence by Pressure Probes” (V. Jezdinsky; typed paper; undated)
  • “Areal Variations of Bed-Form Characteristics in Meandering Streams” (E.M. O’Loughlin and D. Squarer; typed paper; undated)
  • “Same Roughness-Concentration Effects on Boundary Resistance” (E.M. O’Loughlin and E.G. Macdonald; typed paper; undated)
  • “Criteria for Determining Sand Transport by Surface Creep and Saltation” (A.A. Kalinske; typed paper; undated)
  • “Resistance to Flow in Channels of Large Aspect Ratio” (E. Macagno; typed paper; undated)
  • “Pressure-Wave Analysis for Variable Length of a Fluid Column” (E. Macagno and M. Macagno; typed paper; undated)
  • “Pressure, Bernoulli Sum, and Momentum and Energy Relations in a Two-Dimensional Laminar Zone of Separation” (E.O Macagno and W.T.K. Hung; typed paper; undated)
  • “Cavitation and Drag Characteristics of Improved Head Forms” (J.S. McNown; typed paper; undated)
  • “Flow in the Wake of Self-Propelled Bodies and Related Sources of Turbulence” (E. Naudascher; typed paper; undated)
  • “Significance of Container Deformability in the Analysis of Shock Absorbers” (A.D. Newsham; typed paper; undated)
  • “Some Solutions of the Unsteady Two-Dimensional Turbulent Boundary Layer Equations” (V.C. Patel and J.F. Nash; typed paper; undated)
  • “Technical Note: The Importance of the Near Wake in the Drag Prediction of Bodies of Revolution” (V.C. Patel and O. Güven; typed paper; undated)
  • “Boundary-Layer Development at Curved Entrances of Conduits” (P.V. Rao; typed paper, noted as submitted to ASCE’s Journal of Hydraulic Division; undated)
  • “Jet Diffusion in the Region of Flow Establishment” (S. Sami, T. Carmody, and H. Rouse; typed paper; undated)

Box 2. 1947–49

  • “Diffusion of Submerged Jets” (M.L. Albertson, Y.B. Dai, R.A. Jensen, and H. Rouse; typed paper; 1947)
  • “Exploratory Tests on Flow Through Screens” (J.S. McNown and M.L. Albertson, with D.R. Bianco, P.G. Hubbard, and E.G. Peterson; typed  report prepared for David Taylor Model Basin; 1947)
  • “Research in Turbulent Flow” (J.S. McNown; Reprint from Engineering College Research Council’s Proceedings of the Annual Meeting; 1947)
  • “Exploratory Tests on Application of the Three-Dimensional Electrical Analogy” (P.G. Hubbard; typed report prepared for David Taylor Model Basin; 1947)
  • “Application of the Electrical Analogy to Hydrodynamics Problems in Three Dimensions” (P.G. Hubbard and S.C. Ling; typed paper; undated)
  • “An Improved Constant-Temperature Hot-Wire Anemometer” (P.G. Hubbard, E.G. Peterson, and W.D. Baines; typed report prepared for David Taylor Model Basin; 1947)
  • “Paraiba-Pirai Diversion, Santa Cecilia Pumping Plant-Model Tests” (Anonymous, all prepared by IIHR; three typed reports; 1947–49):
    • Flow Conditions for the Unimproved River
    • Flow Conditions for the Improved River and Recommendations for Sediment Diversion
    • Tainter-Gate Operation and Tainter-Gate Discharge Characteristics. Also typed paper, “Model Studies Aid in Design of Pariaba-Pirais Diversion in Brazil” (E.M. Laursen; 1950)
  • “Paraiba-Pirai Diversion, Santa Cecilia Canal Transitions—Model Tests” (Anonymous; typed report; 1950)
  • “Paraiba-Pirai Diversion, Sant’ana Spillway—Model Tests” (Anonymous; typed report; 1949)
  • “Cavitation of Submerged Jets” (P.G. Hubbard and A.C. Spengo; typed report prepared for Office of Naval Research; 1949)
  • “An Evaluation of Several Experimental Methods of Measuring Turbulence in Flowing Water” (P.G. Hubbard and J.S. Norton; typed report prepared for Office of Naval Research; 1949)
  • “An Investigation of Flow Through Screens” (W.D. Baines and E.G. Peterson; typed report prepared for Bureau of Ships and Office of Naval Research; 1949)

Box 3. 1949–53

  • “An Evaluation of Several Experimental Methods of Measuring Turbulence in Flowing Water” (P.G. Hubbard and J.S. Norton; typed report prepared for Office of Naval Research; 1949)
  • “Scour Around Bridge Piers and Abutments—Pier and Abutment Geometry” (E.M. Laursen and J.P. Craven; typed progress report prepared for Iowa State Highway Commission; 1949)
  • “Final Report to the Office of Naval Research on Task Order I, Contract N8 onr-500” (Anonymous; typed report prepared for Office of Naval Research; 1950)
  • Estudio Experimental de Corrientes Planas con el Aparato de Hele-Shaw” (E.O. Macagno; reprint from Ciencia y Técnica; 1950)
  • “Scour Around Bridge Piers and Abutments—Effect of Geometry of Representative Iowa Designs, Report #1” (E.M. Laursen; typed report prepared for Iowa State Highway Commission; 1950)
  • “Scour Around Bridge Piers and Abutments—Effect of Velocity and Depth of Flow, Report #2” (E.M. Laursen and A Toch; typed report prepared for Iowa State Highway Commission; 1951)
  • “A Literature Survey of Boundary-Layer Development on Smooth and Rough Surfaces at Zero Pressure Gradient” (W.D. Baines; report prepared for Office of Naval Research; 1951)
  • “Wind-Tunnel Studies of Pressure Distribution on Elementary Building Forms” (Ning Chien, Yin Feng, Hung-Ju Wang, and Tien-To Siao; report prepared for Office of Naval Research, also photos; 1951)
  • “Particle Shape and Settling Velocity” (J.S. McNown, J. Malaika, and H.R. Pramanik; typed paper, to be presented at International Association of Hydraulic Research meeting in Bombay, India; 1951)
  • “Instruments for Measuring Large-Scale Turbulence in Water” (P.G. Hubbard, D.W. Appel, and S.C. Ling; typed final report prepared for U.S. Army Corps of Engineers; 1952)
  • “A Tour of Some European Hydraulics Laboratories” (J.S. McNown; typed informal report to the Office of Naval Research; 1952)
  • “Investigation of Open Channel Flow over Artificially Roughened Bottom” (W. Band; typed report prepared for Office of Naval Research; 1952)
  • “Hydrodynamic Earthquake Forces on Submerged Subs” (J.S. McNown; typed paper for presentation at Third Midwestern Conference on Fluid Mechanics, University of Minnesota; 1953)
  • “Model Study: Lake Geode Dam Spillway” (E.M. Laursen and A.K. Johnston; typed report prepared for Stanley Engineering Company, Muscatine, Iowa; 1953)
  • “Model-Prototype Comparison of Bridge-Pier Scour” (E.M. Laursen; typed report prepared for Iowa State Highway Commission and Bureau of Public Roads, 1953; see also 1955 paper on study under same name, presented at Highway Research Board annual meeting, in Box 4 of this record set)
  • “Second Progress Report on Model Studies of Scour Around Bridge Piers and Abutments” (E.M. Laursen and A. Toch; typed report prepared for Iowa State Highway Commission and Bureau of Public Roads; undated; see also 1956 final report on this subject, Iowa Highway Research Board’s Bulletin No. 4, in Box 4 of this record set; and also three earlier more specific reports on this subject listed previously in this box)
  • “The Transportation of Slag in Pipes” (E.M. Laursen and S Ince; typed report on experimental investigation, prepared for the Combustion By-Products Co., Chicago; 1953)
  • “Model Study of Hydraulic  Conditions for Station No. 8, Will County, Ill., Intake and Discharge” (E.M. Laursen, D.B. Jones, and M. Hasan; typed report prepared for Public Service Company of Northern Illinois, Chicago; 1953)

Box 4. 1954–57

  • “Keokuk Spillway Model Tests” (Anonymous; typed final report prepared for Sverdrup and Parcel, Inc., St. Louis, Mo.; 1954)
  • “Culvert Diameters in Relation to Upstream Channel Storage for Small Watersheds in Iowa” (J.W. Howe and D.E. Metzler; Iowa Highway Research Board Bulletin No. 2, prepared by IIHR with Iowa State Highway Commission; 1954)
  • “Apparatus Developed for Study of Laminar and Turbulent Flow” (D.E. Metzler; reprint from Civil Engineering; 1954)
  • “Final Report on Model Study of Wesley E. Seale Dam Crest Gates” (anonymous; typed report prepared for Ambursen Engineering Corp., Houston, Texas; 1955)
  • “Discharge Characteristics of Tainter Gates” (A. Toch, reprint from Transactions: American Society of Civil Engineers 120:290–300; 1955)
  • “An Experimental Study of the Cavitation of Submerged Jets” (D.W. Appel; typed progress report prepared for Office of Naval Research; 1956)
  • “Recirculation of Cooling Water Discharged form Thermo-Electric Plants” (G.L. Bata; typed report; 1956)
  • “Field Measurement of Bridge-Pier Scour” (P.G. Hubbard), also “Model-Prototype Comparison of Bridge-Pier Scour” (E.M. Laursen); both are reprints from Proceedings of the 34th Annual Meeting of the Highway Research Board; 1955)
  • “The Hydraulics of a Storm-Sewer System for Sediment-Transporting Flow” (E.M. Laursen: Iowa Highway Research Board Bulletin #5, prepared by IIHR with Iowa State Highway Commission; 1956)
  • “Report on Model Study of Crawford Station Steam Plant” (E.M. Laursen and P.G. Hubbard; typed report prepared for Commonwealth Edison Co., Chicago; 1955)
  • “Scour Around Bridge Piers and Abutments” (E.M. Laursen and A. Toch; Iowa Highway Research Board Bulletin #4, prepared by IIHR with Iowa State Highway Commission; 1956)
  • “Laminar Convection of Heat From Two-Dimensional Bodies with Variable Wall Temperatures” (C.R. Guha and Chia-Shun Yih; reprint from Fifth Midwestern Conference on Fluid Mechanics Laminar Flows; 1957)
  • “Forms of Minimum Wave-Making Resistance for Two Ship Types” (M. Martin; typed report prepared for Office of Naval Research; 1957)
  • “An Investigation of the Total Sediment Load” (E.M. Laursen; typed report prepared for Office of Naval Research; 1957)
  • “Roll Damping Due to Bilge Keels” (M. Martin; typed report prepared for Office of Naval Research; 1958)
  • “Forms of Minimum Wave-Making Resistance for Two Ship Types” (M. Martin; typed report prepared for Office of Naval Research; 1957)
  • “An Investigation of the Total Sediment Load” (E.M. Laursen; typed report prepared for Office of Naval Research; 1957)
  • “Comparison of Two Analyses of Boundary-Layer Data and Flat Plate” (L. Landweber and T.T. Siao; typed report for presentation at Eighth International Towing Tank Conference, Madrid, Spain; 1957)
  • “Operating Manual for the IIHR Finite-Difference Network Analog” (Anonymous; typed report prepared for Bureau of Ships Hydrodynamics Research Program, David Taylor Model Basin; 1957)

Box 5. 1958–62

  • “The Iowa Towing Tank” (M Martin; IIHR report prepared for Office of Naval Research; 1958)
  • “Irrotational Motion of the Liquid Surrounding a Vibrating Ellipsoid of Revolution” (E.O. Macagno and L. Landweber; Journal of Ship Research 2(1): 37-49; 1958)
  • “The Added Masses of Prolate Spheroids Accelerating under a Free Surface” (M.R. Bottaccini; typed report prepared for Office of Naval Research; 1959)
  • “Potential Flow About Bodies of Revolution and Symmetric Two-Dimensional Forms” (L. Landweber; typed report prepared for Bureau of Ships; 1959)
  • “Added Mass of a Rigid Prolate Spheroid Oscillating Horizontally in a Free Surface” (L. Landweber and M. Macagno; Journal of Ship Research 3(4):30-36, 1960; IIHR Reprint 166)
  • “Reanalysis of Boundary-Layer Data on a Flat Plate” (L. Landweber; typed report prepared for Office of Naval Research; 1950)
  • “Scour at Bridge Crossings” (E.M. Laursen; draft report prepared for Iowa Highway Research Board, Bulletin 8; 1959)
  • “Studies of Axisymmetric Gravity Waves of Finite Amplitude” (L.R. Mack; typed report prepared for Office of Naval Research; 1960)
  • “Experimental Studies of an Annular Jet” (L.R. Mack and J. Malsy; typed report prepared for Office of Naval Research; 1960)
  • “An Annular Jet Moving over Still Water” (L.R. Mack; Informal Progress Statement prepared for Office of Naval Research Principal Investigator’s Conference; June 23, 1960)
  • “Vibration of Gates during Overflow and Underflow” (E. Naudascher; typed manuscript; 1961)
  • “Calibration of Cole Pitometer Tubes for the Bureau of Reclamation” (D.W. McDougall; typed manuscript; 1961)
  • “Free-Surface Instability Correlations” (H.J. Koloseus and J. Davidian; typed manuscript, with photos and handwritten notes; 1961)
  • “Pressure Wave Analysis” (E.O. Macagno; typed report for U.S. Army Rock Island Arsenal, Hydrodynamics of Recoil Systems study; 1961)
  • “Taum Sauk Model Investigation” (L.M. Brush; typed report prepared for Sverdrup and Parcel and Associates, includes original sketches and handwritten notes; 1961)
  • “Model Investigation of Channel Stabilization of Mosquito Creek” (L.M. Brush and E.G. Macdonald; typed report to Iowa Highway Research Board; 1963)
  • “Patterns of Flow under a Two-Dimensional Gem” (B.C. Yen; typed report prepared for Office of Naval Research; 1962)

Box 6. 1962–66

  • “Preliminary Study of the History of Hydraulics in Russia from Prehistoric Times until the 1917 Revolution” (M. Ridjanovic; typed report prepared for Rouse’s History of Hydraulics class; 1962)
  • “Image System in an Ellipse due to an External Source” (M. Macagno; typed report prepared for Office of Naval Research; 1962)
  • “On the Role of Eddies in Flow-Induced Vibrations” (E. Naudascher; paper presented at the 10th IAHR Congress, London, IIHR Reprint 189; 1963)
  • “Added Masses of Vibrating Elastic Bodies” (R.G. Warnock; typed report prepared for Office of Naval Research; 1964)
  • “Vibration Frequencies of a Circular Cylinder of Finite Length in an Inviscid Fluid” (R.G. Warnock; typed part three of report prepared for Office of Naval Research; 1963)
  • “An Evaluation of the Method of Direct Determination of Wavemaking Resistance from Surface-Profile Measurements” (L. Landweber; paper presented at International Seminar on Theoretical Wave-Resistance, sponsored by Office of Naval Research, published in proceedings; 1963)
  • “Lagally’s Theorem for Multipoles” (L. Landweber; typed report prepared for Office of Naval Research; 1963)
  • “Variation of Viscous Drag with Froude Number” (J. Wu and L. Landweber; unpublished report; 1963)
  • “Technique of Determining the Viscous Drag of a Ship Model by Means of a Wake Survey” (J. Wu; typed report prepared for Bureau of Ships Fundamental Hydromechanics Research Program; 1963)
  • “A Preliminary Study of the Effect of the Free Surface on the Drag of a Truncated 2:1 Ellipsoid” (A.D. Newsham; typed report prepared for Office of Naval Research; 1963)
  • “Added-Mass Distribution of a Spheroid Vibrating at a Free Surface” (E.O. Macagno; typed report prepared for Office of Naval Research, part 2; 1963)
  • “Drag Coefficients of Supercavitating Bodies of Revolution at Various Angles of Yaw” (M. Macagno and T-Y. Hsieh; typed report prepared for Office of Naval Research; 1963)
  • “A Preliminary Study of the Effect of the Free Surface on the Drag of a Truncated 2:1 Ellipsoid” (A.D. Newsham; typed report prepared for Office of Naval Research; 1963)
  • “Vibration of an Incompressible Fluid” (L. Landweber; typed report prepared for Office of Naval Research, part 1; 1963)
  • “Vibration of a Flexible Cylinder in a Fluid” (L. Landweber; typed report prepared for Office of Naval Research; 1964)
  • “The Effect of the Free Surface on the Drag of Supercavitating Axisymmetric Bodies” (A.D. Newsham; typed report prepared for Office of Naval Research; 1965)
  • “Viscous Resistance – Part I” (L. Landweber; typed paper prepared for 14th American Towing Tank Conference; ­­­1965)
  • “Added Masses of Two-Dimensional Forms by Conformal Mapping” (L. Landweber and M. Macagno; typed report prepared for Office of Naval Research; 1965)
  • “Force on a Prolate Spheroid in an Axisymmetric Potential Flow” (L. Landweber and M. Macagno; SNAME Journal of Ship Research 8(1): 24-37. Also report prepared for Office of Naval Research; 1963)
  • “The Effect of the Free Surface on the Drag of Supercavitating Axisymmetric Bodies” (A.D. Newsham; typed report prepared for Office of Naval Research; 1965)
  • “Sliding Friction and Steady-Discharge Coefficient Effects on the Analysis of the XM37 Recoil Mechanism” (A.D. Newsham, E.O. Macagno, and C-Y. Hung; IIHR report prepared for Research Study of the Hydrodynamics of Recoil Mechanisms; 1965)
  • “Some New Aspects of Similarity in Hydraulics” (E.O. Macagno; paper presented at University of Wisconsin conference on Dimensional Analysis, Similitude, Scaling, and Modeling in Applied Science and Engineering; same title later published in La Houille Blanche, IIHR Reprint 209; ­­­1965)
  • “Characteristics of Subcritical Flow in a Meandering Channel” (B-C. Yen; typed report, funded by National Science Foundation grant; 1965)
  • “Free-Surface Effects on Turbulent-Boundary-Layer Separation” (S-K. Chow; typed report prepared for Office of Naval Research; 1965)
  • “Experimental Study of Methods of Determining Wavemaking Resistance by Means of Surface-Profile Measurements” (H.E. Kobus; typed progress report for Bureau of Ships Fundamental Hydromechanics Program; 1965)
  • “Boundary Layer Development and Spillway Energy Losses” (B. Hunt, R. Chevray; typed unpublished paper, for submission to ASCE Journal of the Hydraulics Division; also correspondence, paper draft; 1965)
  • “Experimental and Analytical Determination of the Induced Drag Due to Bilge Vortices – Progress Report” (J-C. Tatinclaux; typed paper prepared for Bureau of Ships Fundamental Hydromechanics Research Program; 1966)
  • “Influence of the Radius of Curvature on the Drag Induced by Bilge Vortices” ( J-C. Tatinclaux; IIHR Report 102, prepared for Bureau of Ships Fundamental Hydromechanics Research Program; 1967)

Box 7. 1966–83

  • Influencia de la Resistencia Impermanente en la Estabilidad de las Oscilaciones en Chimeneas de Equilibrio” (E. Macagno, M. Goldstein, and A. Pita; typed report, 1966)
  • “A Comparison of Three Methods for Computing the Added Mass of Ship Sections” (M. Macagno; IIHR Report 104, project sponsored by U.S. Navy Bureau of Ships; 1967)
  • “Classical Works in Fluid Mechanics and Hydraulics” (series selected by E.O. Macagno, reprinted in La Houille Blanche; 1966–68).
  • Selections from:
    • Theorie Analytique de la Chaleur” (J. Fourier, 1872)
    • “General Principles of the State of Equilibrium of Fluids,” “General Principles of Fluid Motion,” and “Further Research on the Theory of Fluid Motion” (L. Euler, 1755; French and English copies)
    • “On the Theories of the Internal Friction of Fluids in Motion, and of the Equilibrium and Motion of Elastic Solids” (G.G. Stokes, 1845)
    • “Description d’une Machine pour Mesurer la Vitesse des Eaux Courantes et le Sillage des Vaisseaux” (H. Pitot, 1732)
    • Philosophiae Naturalis Principia Mathematica” (I. Newton, 1687)
    • Sur les Lois des Mouvemens des Fluides, en Ayant Egard a l’Adhesion des Molecules” (L.M.H. Navier, 1821)
    • Discorsi e Dimostrazioni Matematiche Intorno a due Nuove Scienze Attenenti alla Mecanica & I Movimenti Locali” (Galileo Galilei, 1638)
    • Experiences sur le Remou et sur la Propagation des Ondes,” and “Experiences sur la Propagation du Remous” (G. Bidone, 1820, 1826)
    • “An Experimental Enquiry Concerning the Natural Powers of Water and Wind to Turn Mills and Other Machines Depending on a Circular Motion” (J. Smeaton, 1759)
  • “Laboratory Investigation of Flow in River Bends” (E.M. O’Loughlin; typed report prepared for Office of Water Resources Research, U.S. Department of Interior; 1967)
  • “On the Role of Vortex Instability in the Generation of Turbulence” (E. Naudascher; typed paper presented at Fourth Euromech Colloquium, “The Structure of Turbulence”; 1967)
  • “On the Distribution and Development of Mean-Flow and Turbulence Characteristics in Jet and Wake Flows” (E. Naudascher; typed report prepared for Office of Naval Research, also IIHR Report 110; 1968)
  • “Old Gold Model, Type 4-2H Hot-Wire Anemometer and Type 2 Mean-Product Computer” (J.R. Glover; report prepared for Office of Naval Research, also IIHR Report 105; 1967)
  • “An Electronic Totalizer for Current Meters” (J. Glover; typed report prepared for U.S. Army Corps of Engineers, Missouri River Division, also IIHR Report 115; 1969)
  • “Progress Report – Study of the Wavemaking Assumption in the Betz-Tulin Theory” (K.T.S. Tzou; typed progress report prepared for Office of Naval Research; 1969)
  • “Wave Phenomena in Tires” (W.F. Ames; typed report prepared for National Bureau of Standards; 1967)
  • “Equations Equivalent to a First Order Equation under Differentiation” (S.E. Jones and W.F. Ames; reprint from Quarterly of Applied Mathematics 25: 302-303; 1967)
  • “Similarity Variables and First Integrals of Ordinary Differential Equations” (S.E. Jones, W.F. Ames; reprint from International Journal of Non-Linear Mechanics 2: 257-260; 1967)
  • Review of W.F. Ames’ book Numerical Methods for Partial Differential Equations, 1969, from undisclosed journal
  • “Computerized System for Determining the Viscous Drag of a Ship Model” (J.R. Glover, K.T.S. Tzou, and L. Landweber; typed paper presented at 15th American Towing Tank Conference; 1968)
  • “Recent Developments in the Nonlinear Equations of Transport Processes” (W.F. Ames; typed paper presented at Symposium on Nonlinear Problems in Transport, 61st AICE Annual Meeting; 1968)
  • “Effect of the Wake on the Determination of Wave Resistance” (J.C. Tatinclaux; typed progress report prepared for Naval Ship Research and Development Center; 1969)
  • “Study of Bilge Vortex Generation on the Tanker Esso Phillippines” (J-C. Tatinclaux; typed report prepared for Esso Mathematics and Systems, Inc., also IIHR Report 118; 1968)
  • “Flow Visualization in Liquids” (E.O. Macagno; report prepared for U.S. Army Rock Island Arsenal and National Science Foundation, IIHR Report 114; 1969)
  • “Total and Viscous Resistance of the Tanker Esso Phillippines” (C.E. Tsai; typed report prepared for Esso Mathematics and Systems, Inc., also IIHR Report 119; 1969)
  • “Effects of Navigation-Dam Operating Procedures on Mississippi River Flood Levels” (W.W. Sayre; report prepared for U.S. Army Corps of Engineers; 1969)
  • “Flow of Dilute Polymer Solutions in Rough Pipes” (M. Poreh; IIHR Report 126 prepared for Office of Naval Research; 1970)
  • “Wave Resistance of the Tanker Esso Phillippines” (D.D. Moran and C.-E. Tsai; typed report prepared for Esso Mathematics and Systems, Inc., IIHR Limited Distribution Report 7; 1971)
  • “Detailed Model Study of Pump-Approach Flows for the Lake Chicot Pumping Plant” (T. Nakato and J.F. Kennedy; report prepared for Stanley Consultants Inc.; 1977)
  • “Longitudinal Mixing of Heated Water in Open-Channel Flow” (J. Grimm-Strele, W.W. Sayre; typed report prepared for the Department of the Interior, Office of Water Resources Research; 1980)
  • “Review Article – Recollections of Leaders in Fluid Mechanics” (J.S. McNown; reprint, Fluid Dynamics Research 7: 203-214, includes description of Rouse; 1991)

(Processed 12/2003)

Last modified on October 10th, 2012
Posted on January 12th, 2011

Site by Mark Root-Wiley of MRW Web Design