Skip to Content

All News and Pages Related to "boundary layer"

Reports

Posted on October 14th, 2013

2015 S. Bhushan,  H. Yoon, F. Stern, E. Guilmineau, M. Visonneau, S. Toxopeus, C. Simonsen, S. Aram, S-E Kim and G. Grigoropoulos, 2015, “CFD validation for surface combatant 5415 at straight-ahead and 20 degree static drift conditions“, IIHR Technical Report No. 493. 2014 S. Bhushan, H. Yoon, F. Stern, E. Guilmineau, M. Visonneau, S. Toxopeus, C. […]

Series 60 Steady Flow

Posted on September 10th, 2013

Equipment Results are presented from a towing-tank experiment conducted in order to explicate the influence of wavemaking by a surface-piercing body on its boundary layer and wake and provide detailed documentation of the complete flow field appropriate for validating computational fluid dynamics methods. Mean velocity and pressure field measurements were performed for two Froude numbers, 0.16 […]

Series 60 Propeller Hull Interaction

Posted on September 10th, 2013

Experiment Results are presented from a towing-tank experiment of propeller-hull interaction conducted in order to provide detailed documentation of the complete flow field appropriate both for explicating the flow physics and validating computational methods.  Mean-velocity and pressure field measurements were made for the with- and without-propeller conditions for the Series 60 CB=0.6 hull form at numerous […]

5512 Captive Maneuvering

Posted on September 10th, 2013

Experiment Towing-tank experiments are performed for a surface combatant as it undergoes static and dynamic planar motion mechanism maneuvers in calm water. The data includes global forces/moment/motions and phase-averaged local flow-fields, and uncertainty assessment. The geometry is DTMB model 5512, a 1:46.6 scale, 3.048 m long, fiber reinforced Plexiglas hull. Model 5512 is a geosim […]

Flat Plate

Posted on August 28th, 2013

Experiment Results are presented from a towing-tank experiment of 3D separation and free-surface turbulence to provide detailed documentation of the flow appropriate both for explicating the flow physics and validating computational methods.  The model is NACA24 which is a 1.2 m chord length, vertical, surface-piercing hydrofoil.  The data includes far and near field wave elevations, […]

Conference Proceedings

Posted on August 7th, 2013

2015 Volpi, S.; Sadat-Hosseini, H.; Diez, M.; Kim, D.-H.; Stern, F.; Thodal, R.S.; and Grenestedt, J.L. “Validation of High Fidelity CFD/FE FSI for Full-Scale High-Speed Planing Hull with Composite Bottom Panels Slamming,” VI International Conference on Computational Methods for Coupled Problems in Science and Engineering, Venice, Italy, 2015. Campana, E.F.; Stern, F.; and Diez, M. “Hydrodynamic […]

PhD Theses

Posted on August 7th, 2013

University of Iowa theses are available for loan to other institutions and libraries through Interlibrary Loan (ILL). The ILL email address is lib-ill@uiowa.edu. 2013 A. Hanaoka, “An Overset Grid Method Coupling an Orthogonal Curvilinear Grid Solver and a Cartesian Grid Solver,” May 2013. T. Michael, “Development and Validation of a Sharp Interface Cavitation Model,” May […]

Master’s Theses

Posted on August 7th, 2013

University of Iowa theses are available for loan to other institutions and libraries through Interlibrary Loan (ILL).  The ILL e-mail address is lib-ill@uiowa.edu. 2013 T. Dogan, “URANS and DES for Delft Catamaran for Static Drift Conditions in Deep Water,” May 2013. 2011 S. Cook, “Effects of Headwinds on Towing Tank Resistance and PMM Tests for ONR […]

Journal Articles (rigorous review)

Posted on March 16th, 2012

2015 He, W.; Castiglione, T.; Kandasamy, M.; and Stern, F., “Numerical analysis of the interference effects on resistance, sinkage and trim of a fast catamaran,” Journal of Marine Science and Technology, 20, 2, pp. 292-308, June 2015. Stern, F.; Wang, Z.; Yang, J.; Sadat-Hosseini, H.; Mousaviraad, M.; Bhushan, S.; Diez, M.; Yoon, S.H.; Wu, P.C.; […]